Pipes – we offer a wide selection of steel pipes that work perfectly in various types of housing construction, as well as in the construction of simple devices.
Thanks to the ideal shape and excellent strength properties, the steel pipes we supply allow for the creation of structures that are both light and durable. The pipes in our offer are characterized by high precision, dimensional accuracy, and good surface quality. We offer models made of different grades of steel.
Construction pipes
Most popular sizes:
DN200, DN300, DN500, DN700, DN900, DN1000, DN1200, or DN1400
(we also offer other sizes)
Trade lengths, exact
Grades:
S235/S355
Certificate:
3.1
| External dimension (width B height H) |
+/-1% with allowable minimum +/-0.5mm and maximum +/-10mm |
| Wall thickness T | for D ≤ 406.4 mm: T ≤ 5 mm +/-10%, T > 5 mm: +/-0.5 mm for D > 406.4 mm: +/-10% with a maximum of +/ - 2mm |
| Roundness deviation | 2% for sections with a diameter to thickness ratio not exceeding 100, above 100 the deviation should be agreed |
| Simplicity | 0.2% for the entire length, no more than 3 mm for each 1 m of length |
| Mass M | Single pipe: +/-6% |
| Standard length | 6000mm / 12000mm, -0/+50mm |
| Species name | MATERIAL NUMBER | NORM | Yield Strength, (REH) MPA (N/MM2) MINIMUM FOR WALL THICKNESS IN MM | TENSILE STRENGTH, (RM) MPA (N/MM2) MINIMUM FOR WALL THICKNESS IN MM | MINIMUM ELONGATION (A) IN % | IMPACT TESTING | |||
|---|---|---|---|---|---|---|---|---|---|
| MINIMUM AVERAGE VALUE | TEST TEMPERATURE | ||||||||
| T ≤ 16 | 16 < T ≤ 40 | T ≤ 3 | 3 < T ≤ 40 | T ≤ 40 | Je | OC | |||
| EN 10219-1 | |||||||||
| S235JRHb | 1.1939 | EN 10219-1 | 235 | 225 | 360 – 510 | 360 – 510 | 24 | 27d | 20 |
| S275JOHb | 1.0149 | EN 10219-1 | 275 | 265 | 430 – 580 | 430 – 580 | 20 | 27d | 0 |
| S275J2H | 1.0138 | EN 10219-1 | 275 | 265 | 431 – 580 | 430 – 580 | 20 | 27d | -20 |
| S355JOHb | 1.0547 | EN 10219-1 | 355 | 345 | 510 – 680 | 510 – 680 | 20 | 27d | 0 |
| S355J2H | 1.0576 | EN 10219-1 | 355 | 345 | 510 – 680 | 510 – 680 | 20 | 27d | -20 |
| SPECIES NAME | MATERIAL NUMBER | NORM | C max. | Si max. | Mn max. | P max. | S max. | Al razem min. | N max. | CEV MAX. IN % FOR WALL |
|---|---|---|---|---|---|---|---|---|---|---|
| EN 10219-1 | ||||||||||
| T ≤ 40 | ||||||||||
| S235JRH | 1.1939 | EN 10219-1 | 0,17 | - | 1,4 | 0,04 | 0,04 | - | 0,009bg | 0,35 |
| S275JOH | 1.0149 | EN 10219-1 | 0,2 | - | 1,5 | 0,035 | 0,035 | - | 0,009bg | 0,4 |
| S275J2H | 1.0138 | EN 10219-1 | 0,2 | - | 1,5 | 0,03 | 0,03 | 0,02h | - | 0,4 |
| S355JOH | 1.0547 | EN 10219-1 | 0,22 | 0,55 | 1,6 | 0,035 | 0,035 | - | 0,009bg | 0,45 |
| S355J2H | 1.0576 | EN 10219-1 | 0,22 | 0,55 | 1,6 | 0,03 | 0,03 | 0,02h | - | 0,45 |
In this category you will find profiles with a small cross-section in relation to length and steel bars obtained during the rolling process. Wire rods are easy to transport and store, and are therefore used in many different types of industries.
We offer high-quality steel sheets in the form of circles and tapes. Among them, you will find cold-rolled sheets used for the manufacture of bodywork and in the electrical industry. Hot-rolled and corrosion-resistant galvanized sheets are intended for further processing.
Profiles available in our offer are universal solutions used in construction that guarantee the stability and safety of metal structures. We offer you a wide range of products of different shapes and wall thicknesses.
We will give you an answer soon. We'll be in touch!
We will contact you shortly and answer all your questions
send request again
a – longitudinal elongation values. Lateral elongation values -2%
b – impact test only for option 1.3
c - the value corresponds to 27 J at -30°C
d – longitudinally or transversely, to be chosen by the supplier
e – test value from 6 mm wall